Top 6 Air Conditioning Installation Problems To Watch Out

During air conditioning installation, you should know the problems that are you are likely to experience whenever you need the best options. Whether you do it for your business or home, you should ensure that you avoid these mistakes whenever you want it to work perfectly well for your home. The following are the top 6 air conditioning installation problems to watch out today for your home:

air conditioning repair

1. Improperly Sized System

Improperly Sized System is among the most common problems that exist with a split air conditioner or even heating system when it is too small or large. How do you avoid this problem? You can make sure that they run a proper job load calculation. By hiring a reputable or certified heating & air conditioning contractor, he or she will offer you the best services that would improve the safety of your home. In addition, you must know their work history before making a decision on whether you would like to hire them or not whenever you need the best installation services in your home. Ultimately, it will enable you to have sufficient comfort while reducing your higher energy bills since you are able to make savings.

2. Improperly Sized Ductwork

Improperly sized ducts is another common problem that you should know. You should base duct as well as register sizes on a load calculation for a proper operation. Why say so? Any undersized supply ducts or return air can sometimes impede efficiency at the same time overwork your compressor thus resulting in failure of your early equipment. You can seek help from an air conditioning technician who knows how to install it, especially when you want it to work properly.

3. Improperly Sealed Ducts

Ductwork, which has not been sealed properly, will leak or even lose their valuable cooling and heating into an attic or any other undesirable area. This will ultimately cost you lots of money whenever you need to repair it during the process. You should ensure that you do it right whenever you need the best results.

4. Improperly Installed Drains

An improperly drain line installed or drains installed with no emergency overflow pan can cost your house a lot whenever you need the best solutions. You should maintain them well especially when you need to drain water or leak through your walls or ceiling. You must fix the problems when looking for a proper air conditioning installation.

5. Poor Air Quality

Indoor air pollution can be a problem. Many different things like mildew, resins, carpets, mould, pollen, etc. can cause poor indoor air quality. You can use a high air turnover or humidity to fix the problem after hiring a reputable contractor to help to correct the problems by fixing your air as well as a heating system to eliminate these contaminants.

6. Refrigerant Leaks

It is very important that a refrigerant or coolant level of the system of air conditioning maintenance is checked often. This will enable it to work well while helping in saving electrical costs as well as reduction of wear and tear on the unit.

In summary

The above are the top 6 air conditioning installation problems to watch out when making your home safer and comfortable.

HVAC technician

Commercial Air Conditioning Best Practices

Are you looking to ensure that the new air conditioning system in your commercial building will run smoothly, providing comfort for all its inhabitants, but at the same time, not allowing your energy bill to skyrocket?

A commercial air conditioning system can be a lot more complicated than a residential one, with a lot more technical aspects. Read on to find out a few best practices you can apply when it comes to commercial air conditioning in Melbourne.

1. Manage the controls of your commercial air conditioning system properly 

Control systems for HVAC systems can range from simple to highly sophisticated systems. Whether your air conditioning system is controlled by a programmable thermostat or a very robust automation system, you should study its various settings so that you can set up the most ideal and energy efficient setting for you. Your goal should be how to eliminate the most amount of wasted energy while providing the most comfortable setup for the inhabitants with air conditioning. To do this, you may consult with an efficiency expert who will be able to provide great recommendations on how to set up your commercial air conditioning repairs.

2. Avoid having your commercial air conditioning system’s cooling and heating functions to work against each other

Many sophisticated air conditioning systems can operate with both simultaneous cooling and heating functionalities. However, this might lead to the two functions working against each other, using up unnecessary energy and leading to additional wear and tear on the equipment.

To avoid air conditioning repair service, observe your central air conditioning system and check for mechanisms that are operating when they shouldn’t, such as both boilers and chillers running at the same time when only one or neither is needed.

air conditioning Melbourne

3. Continuously improve fan speed controls on your HVAC system

A lot of commercial air conditioning systems are set up so that their fans and pumps operate at a constant pace. However, often the needs of a commercial building or infrastructure are never constant. Talk to your facility manager about possibly using a variable frequency drive, or VDF, which offers a good alternative to the traditional mechanical throttling used to manage air and water flow in the HVAC system.

These VDFs are set up on the motors of the HVAC system’s pumps and fans and usually in a range for varying load requirements. Doing so can offer energy savings of up to 50 per cent.

4. Manage the setting of your commercial air conditioning system during unoccupied times

You can experience significant energy savings and cost reductions if you manage the settings of your HVAC systems during times when your commercial space is empty, such as after office hours or during the weekends. The idea is that you are able to shut off the air conditioning system during these times and avoid turning them on again for very minimal use.

Here are a few simple tips you should remember to achieve this:

  • Adjust the settings in certain rooms or spaces when they are completely unoccupied. 
  • When the building is unoccupied, close outdoor air dampers in order to save on energy.

air conditioning repairs Perth

Heat Your Home in 4 Easy Steps

heater servicing

Game of Thrones says either winter is coming or winter is here; we’re not sure, but either way, there’s definitely a coldness to the breeze wafting around us these days.

And when the season for sweaters and scarves and hot chocolate come in, there’s nothing more you could ask for than a warm, cozy home to come home to at the end of a weary day.

Want to learn how you can heat your home effectively and efficiently in a few simple steps? Read on to find out!

  1. The magic number is at 18 degrees

Have you always wondered what the ideal temperature setting for your heating system is? You’ve come to the right place, and we’re here to tell you it’s at 18 degrees.

At 18 degrees, your home will feel comfortable while you’re in pants and a sweater. If it’s too cold for you in the beginning, it’s okay, it takes a bit of getting used to. Bring down the temperature little by little, one degree a day, until you have fully adjusted. Remember: turning down your thermostat by even just one degree can already provide you with energy savings.

central heating cost

  1. Use the 20-20 timer rule

No, this doesn’t have anything to do with vision. But to be energy-efficient with heating service, you can use the 20-20 rule. That is, turn on your heater 20 minutes before you arrive home from work, and turn off your heater 20 minutes after you go to sleep. This is because it will take approximately 20 minutes before space warms up using a heater, so this will give your house enough time to warm up.

To turn your central heating system on and off at the right time, invest in a smart thermostat that lets you adjust the temperature settings of your heater wherever you are at any time, or do it old school and use a timer.

  1. Only warm up the spaces in your home that you use

If you have many rooms and different divided spaces in your home, be selective when it comes to which areas you heat during the winter. We’re sure you don’t use all the rooms in your home equally – we all have that favourite spot in our home where we stay most often. Warm up your favourite and most used spaces and leave the other areas of your home unheated, turning on the heater in these areas only when absolutely needed. You’ll be amazed at how much energy you’ll be saving.

gas ducted heating cost

  1. Perform a few simple maintenance checks on your heating system

Bleeding your radiators – that is, letting out trapped air from inside it – will vastly improve their efficiency. Similarly, inspecting your boiler and making sure everything is working smoothly can save you a lot of time, money, and headaches from a busted up heating system in the future.

You can also insulate your water tank in the same way that you insulate other parts of your home, like your wall or your roof. This way, you’re able to make your system work more efficiently without heating service.  


How Your Air Conditioning Cools Your Home

air conditioning melbourne

Most businesses and homes install air conditioning systems. The need to manage internal temperatures comes about from changing weather patterns. When summer comes by everyone turns to their air con systems for the needed refreshing coolness indoors. How does your HVAC system go about cooling your home?

Worth noting is that your air conditioning system functions much like your refrigerator. The main difference is that the HVAC system offers large-scale cooling while refrigerators handle smaller, insulated spaces. Understanding how the system works plays a significant role in better handling and air conditioning maintenance.

The Main Components Of Your Air Conditioning System

All HVAC systems use the basic premise of expelling hot air from your home. The systems feature three key elements including the compressor, the evaporator, and the condenser. The condenser and compressor typically have an outside placement on most air conditioning systems while the evaporator is found inside the unit.

 air conditioning melbourne

How Cooling system works

The compressor packs the liquid molecules together, and it derives the molecules from the cooling fluid/gas. The aim is to create a higher energy rise and temperature by making the liquid/gas molecules more compact. From the compressor, the gas/fluid exit in the form of high-pressure, hot gas. The heated gas then moves to the condenser where it gets cooled down and converts back to liquid form. The fluid goes into the evaporator, and its pressure drops. With the decrease in pressure, the liquid converts into gas.

Throughout the process, heat gets extracted from the surrounding air. The heat separates the liquid molecules into gas form. The outer air conditioning casing features metal fins that help to dissipate heat and expedite the thermal heat exchange process. When the refrigerant exits from the evaporator it has once again converted into a chilled gas with low pressure.

The heat separates the liquid molecules into gas form. The outer air conditioning casing features metal fins that help to dissipate heat and expedite the thermal heat exchange process. When the refrigerant exits from the evaporator it has once again converted into a chilled gas with low pressure. The process starts up all over again when the cooling gas goes back to the compressor.

Making use of a fan that connects to the evaporator, the system circulates the cooled down air within your home. Air ducts help in distributing the cold air throughout your home via vents. Your air con system keeps repeating the process until your home or business gets to the desired temperature.

 air conditioning sydney

The Role Of The Thermostat

Your air con system needs information about your home’s desired cooling temperature. The thermostat functions as the gateway connecting the HVAC system and the user. As the user, you input information about the desired cooling temperature and the thermostat relays it to your cooling system.

The thermostat can also adjust temperatures according to the internal environment. It shuts down the air con once internal temperatures reach the desired levels. When the internal temperatures rise, the thermostat senses it and turns the cooling system on once again. The process also keeps taking place until the air conditioning system achieves the desired ambient temperature.


The Top Heater Installation Tips And Steps

heating repair

If you want to install a heating system in your home, you should know the procedures, especially when looking for the best solutions. Upon doing it well, you will improve the looks of your home in the best way possible. Here are some of the top heater installation tips and steps that you should know:

Step 1: Shutting off the gas

Turn to off the gas right to water heater will help prevent any kind of leakage that people may experience through the process. You will always be contented with the solution whenever you need to do it. In addition, you can do it by shutting off the water main supply and drain these lines through opening a faucet, especially on its lowest floor.

Step 2: Draining water within the tank

Attaching a garden hose right to the draining valve and draining the water left in the tank. As a caution, you need to make sure that you disconnect these gas line rights at the nearby union through a pair of wrenches as well as unscrew these pipes from the main gas with a modern pipe wrench.

Step 3: Cutting off the water lines

Unscrew the main vent pipe right from the vent hood as well as move it to these sides. When you remove the water supply, you will be able to find a solution that would enable you to finally do heater installation well in the final stages.

 heating repair canberra

Step 4: Attaching pipe assemblies

Soldering new copper adaptors especially to the copper before screwing these assemblies into your hot water outlet will allow you to use it perfectly. In addition, you can add short and plastic lined nipples right to these shield against the galvanic corrosion for those who really need the quality.

Step 5: Attaching the water lines

Slide these new water heater perfectly into place, cutting again or extending these old tubing so as to meet the new before soldering the tubing at once using modern copper slip couplings should provide you with the best solutions.

Step 6: Re-attaching the vent

Reconnecting the vent. Shove it firmly over a draft hood before anchoring it with these three inches will provide you with the best options. The vent should also rise at least for about 12 inches whenever you need the best solution.

Step 7: Use these two wrenches when attaching the gas line

Reconnecting the gas line. You should coat these threaded ends to the pipe joint compound before screwing the first nipple right into the specific gas valve.

Step 8: Checking for back drafting

Most of the water heaters often rely on a more natural draft of drawing combustion that fumes up these flues. If the draft does not work, those specific fumes, probably containing some deadly carbon monoxide, which will spill out right into your home.

central heating repair

Step 9: Check for any leaks

Turn on the gas to check connections if there are any leaks through brushing a 50-to-50 mixture of this dishwashing liquid as well as water over the specific joints. In case you find any, you should fix them. You can turn on your heater to work for you.

In conclusion, the above are the top tips for heater installation and steps to know.


Heater Installation Cost: What You Need To Know


Every homeowner deserves a warm, comfortable and safe home environment. This implies that when your heating system breaks down and stops working as intended, you’ll always do everything within your power to ensure it is repaired. It is imperative that you hire a highly reputable company which you can trust to conduct the heating repair for you.

There are currently numerous types of heater systems out there on the market, a phenomenon that makes the prospect of choosing the best system a daunting task. Of course, you’ll have to take into consideration factors such as the features, durability, efficiency as well as other available options. All these factors are known to determine the initial heater installation cost of any given heating system. So today in this particular post, we want to discuss in excruciating details the main factors which determine the cost of a new heating system installation or upgrades.

1. The type and size of the unit

The type, as well as the size of any given hot water system, plays a critical role in determining the initial installation costs. In this regard, you’ll find electric hot water systems, gas hot water systems, solar hot water systems and heat pumps.

Electric heating systems are available in two main types, namely instant and storage. Electric heating storage units use special heating elements to heat tanks of water which vary in capacity from twenty-five to more than four hundred litres. Typically, small models cost around $500. On the other hand, larger models which usually use two heating elements may cost more than $1800. Instant electric heating units have no tank. They work by drawing large amounts of electricity to heat water on demand. They have become very popular since they potentially provide almost unlimited warm water. They are affordable and often cost between 600 to $1300.

Gas hot water units also come in storage and instant varieties. Instant gas heating units are relatively costly and typically range between 800 to $1600. Gas heaters equipped with storage tanks start at about $900 for a thirteen-liter unit.

Solar-powered water heaters are equally efficient and cost-effect devices which are worth considering, especially if you live in a hotter region. However, it is crucial to know that they are more expensive to install. They are available in a variety of options, but the roof-mounted types are the most popular ones. They are pricey and may range from 3600 to $4500 or even more.


2. Heat pumps

Like their solar heater unit counterparts, heat pumps are equally efficient. Instead of using the sun’s energy, a heat pump water heater employs the trick of air-conditioning technology, extracting heat from the ambient air before using it to warm your water. They are extremely cost effective but usually require either temperate or warm climate. Again, they must be installed outdoors. They can be noisy and may cost around $4000.

3. The delivery cost

Another important factor which can affect the cost of your heater installation is delivery. Of course, it mostly depends on the location, the size and distance. A significant number of heating units weigh less than 20Kgs, and you can easily transport on your own. However, some are huge, weighing up to 150Kgs.

4. Site access

The other factor which will affect the overall cost of installing a heater unit is the ease of access. Narrow and steep stairs, high roofs as well as other obstacles which require additional equipment and labour will result in extra costs. Wall-mounting may call for extra work whereas cranes can be needed to lift a unit to the intended location in some instances.

5. Installation cost

If you intend to replace your existing water heater with the same model and in the same region, you’ll probably pay a relatively lower heater installation cost. However, if additional valves may be needed, or perhaps your electrical and plumbing systems demand upgrades, the total installation costs will be higher. It is also imperative to note that if you need to reposition the heater to a different location in your home, the costs of installation will increase significantly, especially depending on the level of the electrical or plumbing work needed.

6. The Government intervention

Typically, the government of Australia offers incentives to buy energy efficient heating units through some incentives and rebates. Solar-powered heater units, in particular, can benefits from these programs thus helping to lower the anticipated costs by close to $1000, depending on your preferred heater unit.

Heating devices have become integral components of any modern home. However, before purchasing one, kindly have a look at the possible factors that are likely to affect your overall installation cost.

5 Reasons You Are Not Getting The Best Air Conditioning Service In Melbourne

 cooling service melbourne

Forget the air conditioner’s total breakdown; the most common and mostly ignored air conditioning problem is ineffective operation. Nonetheless, how do you tell if yours is operating optimally? Some common indicators of an inefficient conditioner include the inability to adequately cool all the rooms in your home or overheating during operation and passing the hot air to your home thereby countering its cooling effect. At times even minimal repairs won’t help. Continued enjoyment of the cooling service dictates that you identify the root-cause of the problem which may fall in any of these categories:

  1. Incorrect air conditioner size

Was the decision on the size of air conditioner to buy for your home or business influenced by the size of your home or the cash at hand? The reason most people continue to endure unsatisfactory air conditioning service from their conditioners in Melbourne lies in the fact that they are too cost averse. This pushes them into purchasing conditioners that don’t meet their home’s conditioning requirements. This might explain the reason why your conditioner keeps on breaking down but still doesn’t fulfil its core duty around the house. You have pushed it beyond limits.

  1. Faulty installation

In some cases, you might have had everything right; the perfect sized conditioner, accessories, and the backing of a reputable manufacturer only to hire an inexperienced installer. Improperly fitted duct operations such as poor cabling or insufficient power supply to the conditioner by an inexperienced air conditioner installer may be the cause of problems. In such a case the only cause of action you can adopt if you are to reverse the situation and start enjoying air conditioning service in Melbourne lies in either conducting serious repairs to the current air duct system or completely overhauling it.

 air conditioner repair adelaide

  1. Irregular maintenance

How often do you change your air conditioners coil, clear the debris accumulation inside the fan area or straighten its fins? Did you know that your conditioner should be subjected to an annual comprehensive maintenance service? While the annual maintenance doesn’t cost an arm and leg, most people still avoid it only for their conditioner to experience complex mechanical problems a few down the road. Most of these call for costly repairs or conditioner replacement.

  1. Age of the conditioner

How long have you been using the faulty conditioner? Did you know that the age of an air conditioner directly impacts the quality of its service? With most enjoying a lifespan of up to ten years, perhaps it is time you considered replacing it if you are to continue enjoying quality air conditioner service in Melbourne. After ten years, expect the conditioner to keep breaking down meaning that, in the long run, you will spend more on repairs than it would cost you to buy a new conditioner.

  1. Misuse

Proper air conditioner use not only guarantees enjoyable air conditioning service in Melbourne but also increases its useful life. One of the key guidelines to appropriate use principles calls for locking of doors and windows during operation. You, therefore, shouldn’t complain of your air conditioner’s ineffectiveness if you use it in your home with doors and windows ajar.

 air conditioner repair brisbane

If you are experiencing reduced air conditioning service from your air conditioner, it is time you investigated the cause of the problem. And while some like the age of the conditioner might be easy to tell, you may consider seeking professional assistance if you feel like the condition doesn’t match your home requirements or was improperly fitted.  

Common Causes of Heating System Problems

Even though today’s commercial and residential heating systems are designed to deliver years of excellent service, problems usually arise from time to time. If not dealt with, the problems do not only cause a threat to your comfort but your safety as well. Research shows that heating equipment is a common cause of residential fires.

There are very many issues that can lead to heating system problems, but the most common are discussed below.

Thermostat problems

The thermostat is responsible for controlling the amount of heat generated by the heating unit and the time when it is produced. However, there are times when it may malfunction or is not set right something that can cause issues with the heating system. The solution for this is to either replace or repair the thermostat.

Should this happen, it is best to replace the non-functioning device using a programmable thermostat. These allow users to choose different temperatures on different days of the week and at different times of night or day. Eventually, this can help with substantial reductions in your monthly cooling and heating bills.

Some problems may also arise if the thermostat has not been programmed in the right way. Before you go ahead and call a technician, it is important to make sure that the thermostat has been set correctly. The user manual can help you out with this.

heater problem

Mechanical failure

Mechanical issues are among the most common causes of heating system problems. It encompasses a broad range of components and parts. The heating system is made up of numerous mechanical parts which can wear out after some time. If one component fails, it may mean that the whole heating system will be jeopardised.

Unless you have helped solve such problems in the past, it is usually best to consult a heater repair expert  when dealing with mechanical issues to ensure that they are addressed in the right way. It is also vital that the heating systems are maintained properly so that they do not end up failing prematurely. This way, you can enjoy using your system for a long time without any complications.

Filtration issues

Filtration problems can also mess with your heating system. Manufacturers recommend that the filters are cleaned or replaced at regular intervals. In some cases, if you do not do this, it may end up voiding the warranty.

Note that the filter in the heating system works to keep away dirt, organic particles, and pet dander from being trapped into the duct work or being recycled in your office or home. When it is not cleaned or replaced when it is time, the filter becomes clogged. This results in restricted airflow that forces the heating unit to work extra hard to maintain the workplace or home at comfortable temperatures.

heater repair

When you do not deal with the filtration problems, it could shorten the lifespan of the entire heating unit, and it can also increase the utility bills forcing you to dig deeper into your pocket for something that could have been avoided in the first place.


Top 5 Benefits Of Hiring Certified Ducted Air Conditioner Repair Experts

ducted air conditioner repair

With many people working as ducted air conditioner repair experts, it is important that you hire those who are certified whenever you need the best services. However, most homeowners often do not know the benefits that come with hiring only certified ones. Here are some of the top five benefits of hiring certified ducted air conditioner repair experts whenever you need excellent services:

1. Offer excellent and efficient ducted air conditioner repair services

Since most of these ducted air conditioner repair experts have undergone an intense level of training, they will always ensure that they do provide you with the services that they would satisfy your needs. In addition, since they are professionals, they will work to ensure that you as a customer enjoy services that would work absolutely well for you. In the end, you will appreciate the kind of work that these ac technicians will offer you to improve the condition of your home.

2. Offer affordable services 

Most of the certified ducted air conditioner repair experts charge affordable services. Since they enjoy a massive reputation that they would love to maintain, these certified experts will ensure that they offer you the best-ducted air conditioner repair services thus enabling you to improve the conditions of your home. In addition, from their affordable services, you will be able to save a lot of money whenever you need to enhance the living conditions of your home. Many homeowners today hire certified experts since they are able to work professionally when executing their duties.

3. Offer a wide range of repair services 

All certified ducted air conditioner repair experts understand a lot of repair services that they will offer homeowners whenever they want to improve the looks of their homes. As a homeowner, you can always be able to explain to them any other type of repair services that you would need especially when you need their services. Ultimately, they will always ensure that they offer you those repair services that would improve the state as well as look of your home.

 air conditioning perth

4. Uses the latest repair technology when executing their services

Majority of ducted air conditioner repair experts understands the importance of the latest repair technology in their services. When you hire them, they will always ensure that they offer those services by applying the latest technology. With the inclusion of the latest technology, you can always be certain that they will provide you with repair services that would satisfy the needs of your homes

5. Offer faster repair services 

As a homeowner, you do not want to hire a repair expert who will not be able to work faster to avoid inconveniences that comes during repair. Certified ducted air conditioner repair experts understand their needs to work faster to do the repairs to avoid these situations. In the end, they will ensure that you do continue with your normal life without having to worry about anything as you redefine the looks of your home.

In conclusion, the above are the top 5 benefits of hiring certified ducted air conditioner repair experts that you should know today.


6 Benefits of Ductless Heating System Installation

HVAC systems are the go-to solution for temperature control indoors. Many homes have heating systems, and more are getting them installed for the first time or as replacements. Whichever the case, the chances are that you are looking into ductless heating systems.

Here are some of the benefits of getting a ductless heating system installed in your home.

  1. Increased Efficiency

Just as their name suggests, ductless heating systems do not have the requirement of ductwork. What this means is that ductless systems perform optimally and lose less than 5% heating power.

Traditional heating systems that use ductwork are said to lose up to 40% of their heating potential. However, with ductless systems, your unit will be using lower energy levels resulting in reduced energy costs.

  1. Zone Control Ability

One of the other reasons that you should consider installing a ductless heating system is because they come zone control ability.

Zone control means that you can decide what areas of your home you want to heat up. The result is reduced energy costs and efficiency in heat usage within your home.

Zone control also ensures that heating is instantaneous and even, unlike with traditional systems that may not provide even heating throughout.

  1. Quite Heating

In as much as heating systems provide the much-needed warmth within your home; the last thing you want is increased noise indoors. Ductless heating systems are marginally quieter compared to traditional systems.

Ductless systems work within and outside a unit making them operate quietly.

4.Quick Installation

Installing a ductless heating system is quicker compared to conventional systems that might take days to weeks to fit.

Ductless heating units installation takes just a matter of hours. Owing to the lack of ductwork, all that goes into their installation is fixing copper tubing on your ceiling or wall. The condensing unit outside that should be set on a solid surface, connects to the copper pipe indoor.

They are also generally the best option in places where ductwork wouldn’t work or seems impossible.

  1. Dual Use

Ductless heating systems can offer both cooling and warming requirements efficiently.

Cost saving is a reality with these systems because you don’t have to have separate air con and heating systems. They are better able to control temperature because of the dual use.

  1. Long-term Cost Reduction

While a ductless heating system tends to be costlier when initially buying it, the unit will help reduce your long-term energy costs.

As explained above, ductless heating units are more efficient and have low energy usage. Therefore, the amount you will save in the long term by having one of these units installed in your home will pay off its initial cost.

In summary, having a ductless heating system installed in your home will ultimately help you save on energy costs and improve on heating as well as cooling efficiency within your home.

Ductless heating systems also allow you to control the heating room to room for enhanced performance. The dual heating and cooling ability gives you an all-inclusive solution for warming and cooling your home as required.